The Aliens Legacy
http://www.alienslegacy.com/forum/

Pump Widget mother load
http://www.alienslegacy.com/forum/viewtopic.php?f=3&t=16446		 Page 1 of 2
Author:  Noble [ Mon Sep 19, 2016 12:54 am ]
Post subject:  Pump Widget mother load
Ebay listing, they have multiples, so this is allowed.

http://www.ebay.com/itm/ACCUCARE-BLOOD- ... SwdIFX0vQe


Don't waste your time on a resin widget.




Here's a link to my bracket on shapeways, since I won't be making them anymore.
https://www.shapeways.com/product/6UKVE ... d=60766731
Author:  SGM Baldwin [ Mon Sep 19, 2016 2:03 pm ]
Post subject:  Re: Pump Widget mother load
I like how the name "Pump Widget" is still sticking long after its discovery.
Author:  Velker Actual [ Mon Sep 19, 2016 6:20 pm ]
Post subject: 
What part is this used for?
Author:  retrogarde [ Mon Sep 19, 2016 7:18 pm ]
Post subject: 
The bottom front of the Motion Tracker.
Author:  Moosh89 [ Mon Sep 19, 2016 7:52 pm ]
Post subject: 
I just contacted the seller, they do ship to Canada but at the high price of $35 USD shipping.

Is anyone in the US open to getting one on my behalf and gutting it, to just send the widget? This is how I got my last one through user "Quarax"
Author:  tommin [ Mon Sep 19, 2016 10:49 pm ]
Post subject:  Re:
Moosh89 wrote:
I just contacted the seller, they do ship to Canada but at the high price of $35 USD shipping.

Is anyone in the US open to getting one on my behalf and gutting it, to just send the widget? This is how I got my last one through user "Quarax"


I can do that for you as I've already ordered one myself.

BTW, thanks for the friendly heads up on this one Matt. :D
Author:  Moosh89 [ Mon Sep 19, 2016 11:01 pm ]
Post subject:  Re: Re:
tommin wrote:
Moosh89 wrote:
I just contacted the seller, they do ship to Canada but at the high price of $35 USD shipping.

Is anyone in the US open to getting one on my behalf and gutting it, to just send the widget? This is how I got my last one through user "Quarax"


I can do that for you as I've already ordered one myself.

BTW, thanks for the friendly heads up on this one Matt. :D


PMing you now, thanks!

Also thank you Matt!
Author:  tommin [ Tue Sep 20, 2016 12:49 am ]
Post subject: 
Got yours ordered Moosh. It should be here tomorrow. If anyone else outside the continental US would like to do the same, hit me up.
Author:  Barking Dragon [ Tue Sep 20, 2016 9:46 am ]
Post subject:  Re: Pump Widget mother load
Just got a reply from the seller after asking how much postage will cost to send to Australia....they want $75 USD JUST for postage :shock: :shock: yeah, that ain't happening :evil:
Author:  Osmotic [ Tue Sep 20, 2016 4:57 pm ]
Post subject: 
13 views a day, lol the guy must wonder what the hell is happening
Author:  stimpy [ Wed Sep 21, 2016 11:54 am ]
Post subject: 
I would like a widget please if someone would be so kind to send to the uk
Author:  retrogarde [ Thu Sep 22, 2016 12:16 am ]
Post subject: 
Stimpy, I can help you out. I recently sent a Nostromo ash tray to a UK member and shipping came to $13.50. I imagine the isolated widget piece would cost the same. PM me if that would work for you!
Author:  tommin [ Thu Sep 22, 2016 1:57 am ]
Post subject: 
Got yours ordered and reserved Stimpy. It should be here in a few days.
Author:  Barking Dragon [ Fri Sep 23, 2016 9:35 am ]
Post subject: 
I'm surprised that not everyone has jumped on these considering how many years people have been trying to ID and find them. And as Tom has already mentioned, thanks Matt for the heads up ;)
Author:  Trigger happy [ Fri Sep 23, 2016 10:18 am ]
Post subject: 
Id love to get one but I'm in Australia. Not willing to cough up the shipping.
Author:  tommin [ Fri Sep 23, 2016 2:51 pm ]
Post subject: 
Have one more purchased and reserved. It's final destination is Australia. If you fellas want piggy back on postage for two pump widgets in a padded envelope, we can drive the postage down even lower.
Author:  retrogarde [ Fri Sep 23, 2016 4:53 pm ]
Post subject: 
Act fast folks, only one left!

The seller must be confused as hell! :)
Author:  Space Jockey [ Fri Sep 23, 2016 6:31 pm ]
Post subject: 
They really sold quickly this morning. I got one when there was 4 left taking it down to three.
Author:  necronom [ Fri Sep 23, 2016 7:33 pm ]
Post subject:  Re: Pump Widget mother load
It looks like there is one left. If anyone could get it and ship it to the UK for me, that would be great. The cheapest / slowest shipping will do fine, if there is any difference in shipping price.

And, we are sure this is the correct one, yes?
Author:  tommin [ Fri Sep 23, 2016 8:03 pm ]
Post subject: 
Looks like these have all sold out now and are on some sort of FedEx slow boat. The one I purchased last Sunday reports to be 'out on delivery' finally today. I would have guessed that USPS would have been more cost effective and definitely faster than this.
Author:  stimpy [ Fri Sep 23, 2016 8:52 pm ]
Post subject: 
Thanks for shipping me one over tommin, and thanks for the offer retrogarde! Now all i need is a kango drill, a hama viewer, a jobo minilux, a..........ill get there eventually i hope :D
Author:  Noble [ Fri Sep 23, 2016 9:20 pm ]
Post subject:  Re: Pump Widget mother load
I added a link in the first post for shapeways 3d printing.



The holes in the widgets vary on Accucare, so you may need to do some hole drilling/filling.
Author:  tommin [ Sat Sep 24, 2016 5:55 am ]
Post subject: 
Image

The one that I ordered on the 18th finally came in today. Looks like a good score to me. Thanks again, Matt. :)
Author:  retrogarde [ Sat Sep 24, 2016 11:49 am ]
Post subject: 
Tommin, did it come with the coiled rubber tube? You'll need a length of that for the MT as well.
Author:  tommin [ Sat Sep 24, 2016 4:29 pm ]
Post subject:  Re:
retrogarde wrote:
Tommin, did it come with the coiled rubber tube? You'll need a length of that for the MT as well.


I didn't see one but I'm sure tubing isn't very difficult to locate.

Fellas, I am about to order one of Matt's brackets for mine as it makes for a perfect gasket to mount the widget beneath the Kango shell. There is still time to get a few of these stuffed into the padded envelopes that are being posted outside the US. This will not affect postage.
Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/